-
-
-
DUAL FULL HD LCD DASHCAM Full HD 1080p @30fps for both front and rear cameras. The DR490L-2CH records fluid videos of the front and rear of your car at a 130° angle of view. The Sony STARVIS image sensor gives you outstanding video clarity day and night. With Night Vision, video clarity at night is further enhanced during Parking Mode–especially useful in low-lit areas like underground parking lots. The LCD touchscreen and simple user interface make navigating the menus a breeze.
-
FULL HD CLOUD DASHCAM PERFORMANCE AND FUNCTIONALITY Sony STARVIS™ sensor with Full HD 1080p at up to 60 frames per second. Record fluid videos at a wide 139° view angle. STARVIS imaging sensors are the benchmark in video clarity under low light, and the one equipping the DR750S-1CH is no exception. You can rest assured that your dashcam will capture critical details whether you are driving or letting your BlackVue monitor your parked vehicle. With BlackVue Over the Cloud, check on your car from anywhere, anytime.
-
DUAL-FULL HD CLOUD DASHCAM DASHCAM WITHOUT COMPROMISE Dual STARVIS™ sensors in Full HD 1080p (front 60 / rear 30 frames per second). Seeking a dual-camera system that does not compromise on fidelity? Look no further. Record fluid videos of the front and back of your car at a wide 139° view angle. STARVIS imaging sensors are a reference in video clarity under low light, and they equip both the front and rear cameras of the DR750S-2CH. You can rest assured that your dashcam will capture critical details whether you are driving or letting your BlackVue monitor your parked vehicle. With BlackVue Over the Cloud, check on your car from anywhere, anytime.
-
Redefining the Dashcam The DR900S Series redefines expectations for dashcam video fidelity and storage efficiency. With its 8-megapixel CMOS sensor in the main camera, the DR900S-2CH captures 4K Ultra High Definition video—four times as many pixels as Full HD. The rear Full HD Sony STARVIS™ image sensor ensures best image quality under any light. Thanks to the H.265 (HEVC) compression, your videos look better and file size is kept as small as ever.
-
Cub 4s
- 4,000 lb (1,814 kg) line pull
- Power in and power out
- Winch drum centred avoids the interference of rope and provides streamlined appearance
- Mechanical load holding and dynamic brake for 100% braking
- High efficiency, low amp draw and sealed permanent magnet motor
- Full metal 3 stage planetary gear train for greater pulling force
- Sliding pin and ring gear clutch for rapid synthetic rope payout
- Weather sealed contactor gives better water proof and lower amp. draw
- E/e marked as of EU Directive 97/24/EC. EEC Type - Approval Number: e4*97/24*97/24/8/IX*0036*01
-
DV-6s
- Heavy duty series wound motor delivers superior torque output and faster line speed.
- Lightweight and compact design is easy for front of vehicle.
- Submersible sealed contactor handles high amps and allows higher duty cycle.
- 12 strand construction synthetic rope, coated to improve abrasion resistance and to protect from the ingress of dirt and grit.
- The U.S Germany, U.K. France, etc patented automatic, full load cone brake structure outside the drum holds the full load without slippage.
- Meet international standards of CE Machinery Directive 2006/42/EC and CE Electromagnetic Compatibility Directive 2004/108/EC.
- 2” rear receiver and quick connector wiring kits for rear of vehicle as option.
-
- All sealed high performance motor supplies superior torque output and faster line speed.
- 3 stage planetary gearbox delivers the most reliable and durable performance of winch under the rugged conditions.
- The U.S., Germany, U.K., France, etc patented automatic CBS (Cone Brake Structure) holds firmly in full load and provides easy maintenance. Specific design of brake (CBS) outside the drum is ideally suited to heat-sensitive synthetic rope.
- Heavy duty sealed contactor ensures sound waterproof protection.
- Turn clutch by ergonomic T-handle for rapid rope payout. The equally positioned pin holes make it easily rotate by 40° increments for special in-bumper application.
- Protective thermal sensor LED.
-
Features
• Cree's newest XHP35 HI D4 LED, max output 2000 lumens, max runtime 210 hours• Max beam distance 1000M, best suited for outdoor adventures; search and rescue operation• Dual Switch design for convenient and easy operation- Independent tail and side switch, each with full set offeatures and easily adapted to any scenarios• Unique lockout mode prevents accidental operations; avoiding battery drains during storage or travel and prevents unintended direct shining into eyes• Battery capacity indicator display enables controlled usage based on remaining battery charge• ITS (Intelligent Temperature System) temperature control monitors internal temperature and adjusts outputs for balanced brightness; protects the LED and internal components; ensuring safety, stability and optimal performance• Dual Switch for one-touch turbo and one-touch low, plus mode memory• Reverse-polarity protection prevents damage due to incorrect battery orientation• Integral body design eliminates battery holder for superior comfort• Aircraft-grade aluminum alloy (Mil-Spec HAIII), lightweight and abrasion resistant• Tempered glass lens with AR coating; scratch resistant• Updated reflector design, coated to provide the perfect beam spot for exceptional distance illuminationG35: With its Extreme output, Easy interface, Far-reaching beam, and Long run time all packed into a compact body, far outperforms the competitors -
3.5 Amp UltraSafe Battery Charger and Maintainer
The G3500 is a portable and automatic battery charger. It can be used for both 6V and 12V lead-acid and 12V lithium-ion batteries. The G3500 is designed for charging cars, boats, RVs, SUVs, diesel trucks, motorcycles, ATVs, snowmobiles, personal watercraft, lawn mowers, and much more. It can be used as a battery maintainer to keep both starter and deep-cycle batteries fully charged. It also monitors battery activity for safe and efficient charging without any overcharge. The G3500 is complete with a built-in battery desulfator in order to rejuvenate underperforming batteries.- A 6V and 12V battery charger and maintainer.
- Charges lead-acid and lithium-ion batteries up to 120 amp-hours.
- Recovers deeply discharged batteries down to 2-volts.
- Spark-proof technology and reverse polarity protection.
- Built-in battery desulfator to recover worn-out batteries.
- Safely monitors battery actively with zero overcharge.
- Suitable for start-stop and CANbus vehicle systems.
- Advanced diagnostics indication for damaged batteries.
- Progressive repair mode for heavily sulfated 12V batteries.
-
7.2 Amp UltraSafe Battery Charger and Maintainer
The G7200 is a portable and automatic battery charger. It can be used for both 12V and 24V lead-acid and lithium-ion batteries. The G7200 is designed for charging cars, boats, RVs, SUVs, diesel trucks, motorcycles, ATVs, snowmobiles, personal watercraft, lawn mowers, and much more. It also can be used as a battery maintainer to keep both starter and deep-cycle batteries fully charged. It also monitors battery activity for safe and efficient charging without any overcharge. The G7200 is complete with a built-in battery desulfator in order to rejuvenate under-performing batteries.- A 12V and 24V battery charger and maintainer.
- Charges lead-acid and lithium-ion batteries up to 230 amp-hours.
- Recovers deeply discharged batteries down to 2-volts.
- Spark-proof technology and reverse polarity protection.
- Built-in battery desulfator to recover worn-out batteries.
- Safely monitors battery actively with zero overcharge.
- Suitable for start-stop and CANbus vehicle systems.
- Advanced diagnostics indication for damaged batteries.
- Progressive repair mode for heavily sulfated 12V batteries.
- Constant power supply for changing a car battery or powering 12V devices.
-
4000 Amp UltraSafe Lithium Jump Starter
The GB150 is a portable lithium-ion battery jump starter pack that delivers 4,000-amps (22,500 J3S) for jump starting a dead battery in seconds. It features a patented safety technology that provides spark-proof connections and reverse polarity protection making safe and easy for anyone to use. It's a powerful battery booster that doubles as a portable power source for recharging USB devices, like a smartphone, tablet and more, or powering 12-volt devices, like a tire inflator, power inverter and much more. Designed for a car, boat, RV, truck and more with both gas and diesel engines up to 10 liters and more.- A lithium battery jump starter rated at 4,000 Amps (22,500 Joules3S).
- Spark-proof connections and reverse polarity protection.
- Recharges USB devices, like smartphones, tablets, and more.
- Power 12V devices anywhere, like tire inflators, power inverters, and more.
- 500 lumen LED flashlight with multiple modes, including SOS.
- Jump starts both gas and diesel engines up to 10 liters and more.
- Provides up to 80 jump starts on a single charge.
-
2000 Amp UltraSafe Lithium Jump Starter
The GB70 is a portable lithium-ion battery jump starter pack that delivers 2,000-amps (15,700 J3S) for jump starting a dead battery in seconds. It features a patented safety technology that provides spark-proof connections and reverse polarity protection making safe and easy for anyone to use. It's a powerful battery booster that doubles as a portable power source for recharging USB devices, like a smartphone, tablet and more, or powering 12-volt devices, like a tire inflator, power inverter and much more. Designed for a car, boat, RV, truck and more with gas engines up to 8 liters, and diesel engines up to 6 liters.- A lithium battery jump starter rated at 2,000 Amps (15,700 Joules3S).
- Spark-proof connections and reverse polarity protection.
- Recharges USB devices, like smartphones, tablets, and more.
- Power 12V devices anywhere, like tire inflators, power inverters, and more.
- 400 lumen LED flashlight with multiple modes, including SOS.
- Jump starts gas engines up to 8 liters, and diesel engines up to 6 liters.
- Provides up to 40 jump starts on a single charge.
-
Rotating 360 degree design for you to adjust the light angle freely
-
• Tactical crenulated strike bezel attachement option for self-defence • Highly secure fit and detachable • CNC machined from 304 stainless steel billet and finished for smooth handling • Dimension: Height 20.80mm, Diameter 35.00mm • Net weight: 25g • For use with: RS11, XT11, XT12, XT11S, XT11GT, XT12S
-
-
Klarus Filters 64mm for XT32
- Elastic silicone body, Fits multiple light bezels, Rugged lens protection.
- Red Filter- Emergency, Traffic control or Hunting. Penetrates smoke and fog, keeps hunters hidden. Retains night vision.
- Green Filter-Hunting and Hiking. Map reading or covert operations. Retains night vision.
- Blue Filter- Fishing. Blood trail tracking. Reading up close.
- 63.6mm bezel compatible (i.e. XT32)
-
-
-
-
Features
• Microcomputer control system allows each of the four battery slots to charge individually • Capable of charging 4 batteries simultaneously (Ni-MH/Ni-Cd/ LiFePO4/ 3.7V Li-ion) Li-ion：26650 22650 18650 18490 17670 17500 16340 14500 10440 LiFePO4：16340(RCR123A) Ni-MH/Ni-Cd：AA AAA AAAA C • The 12 LEDs (4 groups) will clearly display the charging progress of the battery Charging voltage is from AC100V to 240V or DC12V, safe to use on all power grids in cities worldwide • -dV/dt Control technology to charge Ni-MH and Ni-Cd batteries more fully • Built-in reverse polarity and short-circuit protection • Features over-charge protection to prevent battery damage. Automatically stops charging when complete • Auto-activation function： a). Automatically reactivates “zero voltage” short-circuit protected Li-ion batteries that have been completely drained of power b). Three corresponding indicator lights flash simultaneously when attempting to charge a battery that cannot be reactivated • Made from durable ABS (fire retardant/flame resistant) for your safety • Designed for optimal heat dissipation, long lifespan.Specifications:-
Input Voltage: AC 100-240V 50/60Hz DC 12V • Output Voltage, Current: 4.2V±1%V, 375mA×4 750mA×2 3.6V±1%V, 375mA×4 750mA×2 1.48V±1%V, 375mA×4 750mA×2 Please note : Slots 1 and 3 constitute one group; Slots 2 and 4 constitute the other group When using one battery in a single group, the battery charging current is 750mA • Compatible with： Li-ion, Ni-MH, LiFePO4, Ni-Cd Li-ion：26650 22650 18650 18490 17670 17500 16340 14500 10440 LiFePO4：16340(RCR123A) Ni-MH, Ni-Cd：AA AAA AAAA C • Size：138mm×96mm×36mm • Weight: charger weight 165g，charge cable weight 40g • Optimal working environment：5%(0°C)-90%(35°C) (fully-laden regular activity) • Storage temperature: 0°C-40°C -
Features
• Microcomputer control system allows each of the four battery slots to charge and display the voltage and charging capacity of each battery independently • Capable of charging 4 batteries simultaneously (Ni-MH/Ni-Cd/LiFePO4/3.7V Li-ion/3.8V Li-ion) Li-ion：26650 22650 18650 18490 17670 17500 16340 14500 10440 16340 (RCR123A) Ni-MH/Ni-Cd：AA AAA AAAA C • Charging voltage is from 100-240V, suitable for use in ANY country worldwide • LCD panel clearly displays battery's charging progress, type, voltage and capacity • Can be used to charge batteries either as a Car charger with DC (5V 2A) or as a home charger using AC • DV Control technology improves the charging efficiency and shortens the charging time • Built-in reverse polarity and short-circuit protection • Features over-charge protection to prevent battery damage. Automatically stops charging when complete • Auto-activation function: a). Automatically reactivates “zero voltage” short-circuit protected Li-ion batteries that have been completely drained of power b). LCD displays “null” when attempting to charge a battery that cannot be reactivated • Made from durable ABS (fire retardant/flame resistant) for your safety • Designed for optimal heat dissipation, long lifespanSpecification
• Input Voltage: AC 100-240V 50/60Hz • DC 5V 2A • Output Voltage: 4.35V ±0.02V/4.2V±0.2V/ 3.6V ±0.02V / 1.43V ±0.02V Input Current: 1000mAh x 2/500mAh x 2 (Slots 1 and 4 current: 1000mAh z for large capacity batteries; Slots 2 and 3 current 500mAh for small capacity batteries) • Size：145mm×100mm×3mm • Compatible with: LiFePO4, 3.7v & 3.8v Li-ion, Ni-MH, Ni-Cd • Li-io：26650 22650 18650 18490 17670 17500 16340 14500 10440 \16340( RCR123 ) Ni-MH, Ni-Cd：AA AAA AAAA C • Weight: 260g • Optimal working environment: humidity 5-90% and temperature 0-35°C ( fully-laden regular activity) • Storage temperature: 0°C-40°C -
Features
• Microcomputer control technology for intelligent charging • Capable of charging almost all types of rechargeable batteries (Ni-MH/Ni-Cd/ LiFePO4/3.7V Li-ion/3.85V Li-ion) Li-ion：26650 22650 18650 18490 18350 17670 17500 16340 14500 10440 16340(RCR123A) Ni-MH/Ni-Cd：AA AAA AAAA C • LED display to clearly show charging progress • Optional 0.5A or 1A output charging current • Charger cable DC 5V micro USB port connects directly to either a car charger plug, a computer USB port or other USB charger plug for charging at home or while travelling • -DV/dt Control technology to charge Ni-MH and Ni-Cd batteries more fully • Built-in reverse polarity and short-circuit protection • Features over-charge protection to prevent battery damage. Automatically stops charging when complete • Auto-activation function： a). Automatically reactivates “zero voltage” short-circuit protected Li-ion batteries that have been completely drained of power b).Will not charge a battery that cannot be reactivated. • Made of durable ABS (fire retardant/flame resistant) for your safety • Optimal heat dissipation design for long lifespanSpecification
• Input Power: Micro USB DC 5V/1A • Output Voltage : 4.35V/4.2V/3.65V/1.48V ±1% • Output Current : 0.5A/1A • Size : 115mm×37mm×32mm (Length/Width/ Height) • Compatible with：LiFePO4, 3.7V/3.85V Li-ion, Ni-MH, Ni-Cd Li-ion：26650 22650 18650 18490 18350 17670 17500 16340 14500 10440 16340(RCR123A) Ni-MH, Ni-Cd：AA AAA AAAA C • Weight: 45g+17g(micro USB cable) • Optimal working environment：5%(0℃)-90%(35℃) (fully-laden regular activity) • Storage temperature: 0℃-40℃ -
Features
• Microcomputer control system allows each of the two battery slots to charge individually • Capable of charging 2 batteries simultaneously (Ni-MH / Ni-Cd / LiFePO4 / 3.7V Li-ion / 3.85V Li-ion) Li-ion：26650 22650 18650 18490 17670 17500 16340 14500 10440 16340(RCR123A) Ni-MH/Ni-Cd：AA AAA AAAA C • LEDs display to clearly show charging progress • Optional 0.5A or 1A output charging current • Charger cable DC 5V micro USB port connects directly to either a car charger plug, a computer USB port or other USB charger plug for charging at home or while travelling • Use as a power bank capable of charging USB equipment, with an Li-ion battery as the power source • -DV/dt Control technology to charge Ni-MH and Ni-Cd batteries more fully • Built-in reverse polarity and short-circuit protection • Features over-charge protection to prevent battery damage. Automatically stops charging when complete • Auto-activation function： a). Automatically reactivates “zero voltage” short-circuit protected Li-ion batteries that have been completely drained of power b).Will not charge a battery that cannot be reactivated. • Made of durable ABS (fire retardant/flame resistant) for your safety • Optimal heat dissipation design for long lifespanSpecification
• Input Power: Micro USB DC 5V/2A • Output Voltage : 4.35V/4.2V/3.65V/1.48V ±1% • Output Current : 0.5A/1A • USB port output: 5V/1A • Size : 115mm×63.5mm×29mm (Length/Width/ Height) • Compatible with：LiFePO4, 3.7V/3.85V Li-ion, Ni-MH, Ni-Cd Li-ion：26650 22650 18650 18490 17670 17500 16340 14500 10440 16340(RCR123A) Ni-MH, Ni-Cd：AA AAA AAAA C • Weight: 75g • Optimal working environment：5%(0°C)-90%(35°C) (fully-laden regular activity) • Storage temperature: 0°C-40°C -
- Highly elastic, pliable and flexible to fit many of our flashlight models.
- New white diffuser: can be compatible with 33~35mm bezel(like XT10/XT11/XT12/XTQ1/XT11S/XT11GT/RS11/G20/ST11/ST12/ST15）
-
-
Features
• Three fast and easily interchangeable RED, WHITE and GREEN coloured LEDs that can be moved to the centre of the lens as required , providing ultra long-range lighting • WHITE light utilizes CREE XP-L HI V3 LED, Maximum output of up to 700 lumens, beam distance up to 500m • RED light utilizes CREE XP-E2 P4 LED, Maximum power of up to 3000mW, beam distance up to 225m • GREEN light utilizes OSRAM LT CP7P LED, Maximum power of up to 3000mW, beam distance up to 345m • The red light, excellent for illumination of targets at night while preserving night vision, is widely used for hunting and military purposes • The green light can be used for hunting, searching in the dark or map-reading • Although humans can see clearly with the Red and Green lights, they do not disturb animals, greatly improving hunting ability • Head can be rotated to adjust beam focus, easily changing between spotlight and floodlight modes. This feature makes the FH10 instantly adaptable for long-range searching or short range lighting • Uses one 18650 battery. The head diameter is 49mmm and body diameter is 25.4mm, fitting standard gun mounts. The FH10 is a highly compact but extremely effective hunting flashlight • Unique aspheric lens, luminousness up to 97%+, toughened, high temperature resistant ultra-clear glass • Dual tactical tail switch for easy non-visual, one-handed touch operation; Quick and easy to locate the switches in the dark • Dual springs in head and tail for improved drop and shock resistance • Reverse-battery protection prevents damage to both flashlight and battery • Waterproof to IPX-6 Standard, for use in adverse weather conditions • Aircraft grade aluminum, Military III hard anodic oxidation, sophisticated technology, durable and scratch resistant • This product is patent protected and legal action will be taken against counterfeits !Specifications
• LED: WHITE light utilizes CREE XP-L HI V3 LED; RED light utilizes CREE XP-E2 P4 LED; GREEN light utilizes Osram LT CP7P LED • WHITE light, RED light and GREEN light each have three lighting modes • Working Voltage: 3.0V-6.4V • Compatible batteries: CR123A*2, 18650 battery with PCB protection *1 • Material: Aircraft grade aluminum, Military III hard anodic oxidation • Colour: Black • Lens: Glass lens • Switch type: Tactical tail switch + Side colour selection button • Dimensions: 180mm(7.09")(Length) x 25.4mm(1") (Body diameter) x 49mm(1.93") (Head diameter) • Net weight: 265g (Excluding battery) -
Features
• CREE XP-L HI V3 LED; Extreme floodlight and spotlight beam capability; max beam distance up to 300 meters. • Klarus Focusing System(KFS), next-gen patented optical lens(patent number: 201820399580.X) with ergonomically designed adjustable focus/zoom, modify output from spotlight to floodlight easily; even and soft flood light pattern will dazzle users. • Optical-grade Polycarbonate Lens, superior light transmittance, long lifetime, resistant to oxidization, high temperature, and ultraviolet ray. • 2600mAh 18650 battery included, max output up to 1000 lumens. • Patented tailcap dual-switch and side switch design，suitable for all types of scenarios and easy to operate. • Intuitive User Interface: One Touch Strobe; One Touch Turbo; One Touch Low; Mode Memorization; SOS; Side Switch Lock Out Function; Battery Capacity Indicator, Convenient USB Charging; ITS (Intelligent Temperature protection System); Quick Mode Change. • Compact and Lightweight. • Patented Tactical Tail Dual-Switch Control; non-visual tactile one-handed operation in the dark, intuitive to operate. • Two interfaces: Tactical Setting; Outdoor Setting. ◇Tactical Setting: Classic KLARUS XT series control. One Touch Strobe; One Touch Turbo; versatile in all capacities. ◇Outdoor Setting: Specifically designed for the wilderness. One Touch Low; One Touch Turbo; Multiple output levels with memory, SOS function; suitable for all needs in Hunting, Hiking, Camping or Search and Rescue. • Common Micro USB recharging port protects against moisture, dust and sand. • 1A recharging current; brings the light quickly back into action. • Intelligent Digital Charging Module; monitors charging progress for safe and fast recharging with over-charging protection. •Intelligent Temperature Protection System(ITS), monitors and auto-adjusts output levels in real-time to keep LED and crucial component safe for the best balance of performance and equipment safety. •Battery Capacity Indicator shows remaining battery capacity any time. • Springs at bezel and tail resist shock and drop damages. • Reverse Polarity Protection; eliminates damage from incorrect battery orientation. • Aero-space Aluminum alloy body with CNC machining; Mil-spec hard anodizing (HA III); lightweight and robust.Specifications
• CREE XP-L HI V3 LED, lifetime up to 50,000 Hours. • Tactical Setting by Default. 4 lighting levels and 2 flash modes. • Working Voltage: 2.5v-8.4v. • Compatible Batteries: 1 x 18650, 2 x CR123A or 2 x Klarus 16340. • Charging Time: Depends on the battery capacity. Formula: Charging Time=(Capacity of Battery/1000mA+1H). • Optical System: Klarus Focusing System(KFS). • Switch: Tactical Tail Dual-Switch + Side Switch. • Dimensions: Head - 35.0mm (1.38”) diameter Body - 25.4mm (1.00”) diameter Length - 140.0mm (5.51”) • Weight: 115g (4.06oz) without battery. • Material: Aerospace Aluminum Alloy 6061-T6, Mil-Spec HAIII Anodizing. • Accessories Included: 1 x Micro USB Cable, 1 x Lanyard, 1 x Spare O-ring, 1 x Klarus 18650 Battery, 1 x Nylon Holster, 1 x Clip. -
Features
• 18GT-36 3600mAh Li-Ion 18650 battery included, max runtime up to 170 hours. • One-Touch Turbo with either side and tail switch, One-Touch Low with tail switch, easy to operate. • Independent tail and side switch, each with full set of features and easily adapted to any scenarios. • For side switch, the current output mode will be memorized when the flashlight is turned off, the output will automatically return to this mode when powered ON. • Unique lockout mode of both side and tail switch prevents accidental operations; avoids battery drains during storage or travel and preventing unintended direct shining into eyes. • Intelligent Battery Load Check System compatible with a wide variety of batteries. • Integrated Micro-USB charging port supports 1A fast charging. • Newest ITS Intelligent Temperature Protection System, monitors internal temperature and adjust output for maximum brightness, protects LED and internal components to ensure safety, stability, optimum performance, and user comfort. • Aerospace Aluminum Alloy construction; CNC precision machining; HAIII Mil-Spec anodizing, lightweight and abrasion resistant. • Reverse-polarity protection prevents damage due to incorrect battery orientation. • Compact Size, comfortable any grip. • Hardened glass lens with AR coating; scratch resistant. • Updated reflector design, coated to provide the perfect beam profile for exceptional illumination at any distance.Specifications
• CREE XHP35 HD E4 LED, 50,000 hours life. • 4 lighting levels and 2 flash modes. • Working Voltage: 2.5-8.4V. • Compatible Batteries: 1 x 18650, 2 x CR123A , 2 x KLARUS 16340. • Reflector: Orange Peel. • Switch: Tail Switch and Side Switch. • Dimension: Head 25.6mm(1.01”) x Body 24.5mm(0.96”) x Length 120.1mm(4.73”). • Weight: 80.2g(2.83oz)(Excluding battery). • Material: 6061-T6 Aluminum Alloy, Mil-Spec HAIII Anodizing. • Lens: Hardened, AR-coated lens, Scratch-resistant. • Accessories Included: 1 x Lanyard, 1 x Spare O-ring, 1 x 18650 Battery(18GT-36), 1 x Micro-USB Cable, 1 x Holster.User Manual
-
Features
• CREE Next Gen. XHP70.2 P2 LED; Up to 3000 Lumen output; Max runtime of 150 hours • Side and Tail Switch can access One-Touch Turbo, Tail Switch can access One-Touch Low mode • Independent Dual-Switch Control for Maximum Versatility • Side Switch memorizes current output mode for ease of use • Lock-Out mode to prevent accidental power-on and discharging battery for safety • Integrated Micro-USB charging port with up to 2000 mA charging current for extremely fast recharging (when used with KLARUS 2A adapter cord) • Intelligent Battery Capacity indication to display the remaining power level • ITS Temperature Control System guarantees safe operation and protects LED and internal circuitry from overheating • Aerospace Aluminum Alloy body; Mil-Spec HAIII anodizing for superior protection • Reverse-Polarity Protection prevents accidental damage from incorrect battery installation • Convenient Size, Easy to Carry • Anti-reflective (AR) coated mineral lens, hardened against scratches • Unique reflector design to attain both Spot and Flood beams with a perfect hotspot G20 (SLIC): Super Bright; Long Runtime; Indestructible; Convenient Warning: Use only 26650 Li-ion batteries in the G20 Do not use 18650/16340/CR123A batteriesSpecifications
• CREE XHP70.2 P2 LED; 50,000 hours life • 4 output levels, 2 strobe patterns • Battery: Li-ion 26650 Battery x 1 (Use only 26650 Li-ion batteries (included),Do not use 18650 /16340 / CR123A batteries) • Voltage Range: 2.5V – 5V • Dimension：Bezel 36mm (1.41"); Body 34mm (1.34"); Overall Length: 124mm(4.88") • Weight：131g (4.62oz) (without battery) • Material：Aerospace Aluminum Alloy 6061-T6, Mil-Spec HAIII anodizing • Lens：Hardened Mineral Glass; AR coated; Scratch resistant • Reflector: Orange Peel • Body Color：Black • Switch: Side Switch + Tail Switch • Protection：IPX-8 rating (up to 2 meters submersible) -
Features
• Cree's newest XHP35 HI D4 LED, max output 2000 lumens, max runtime 210 hours• Max beam distance 1000M, best suited for outdoor adventures; search and rescue operation• Dual Switch design for convenient and easy operation- Independent tail and side switch, each with full set offeatures and easily adapted to any scenarios• Unique lockout mode prevents accidental operations; avoiding battery drains during storage or travel and prevents unintended direct shining into eyes• Battery capacity indicator display enables controlled usage based on remaining battery charge• ITS (Intelligent Temperature System) temperature control monitors internal temperature and adjusts outputs for balanced brightness; protects the LED and internal components; ensuring safety, stability and optimal performance• Dual Switch for one-touch turbo and one-touch low, plus mode memory• Reverse-polarity protection prevents damage due to incorrect battery orientation• Integral body design eliminates battery holder for superior comfort• Aircraft-grade aluminum alloy (Mil-Spec HAIII), lightweight and abrasion resistant• Tempered glass lens with AR coating; scratch resistant• Updated reflector design, coated to provide the perfect beam spot for exceptional distance illuminationG35: With its Extreme output, Easy interface, Far-reaching beam, and Long run time all packed into a compact body, far outperforms the competitorsSpecifications
• CREE XHP35 HI D4 LED, 50,000 hours life.• 4 light levels and 2 flash/strobe modes• Battery:3x 18650 (1 x 18650 or 2 x CR123A can be used in emergencies per instruction)• Size:160.2mm/6.31”(Length)*73mm/2.87”(Bezel Diameter)*45.5mm/1.79”(Body Diameter)• Net Weight: 371g (w/out batteries)• Working voltage: 3-8.4V• Lens: Reinforced ultra-clear tempered glass, AR coated for scratch resistance• Material: Aircraft-grade aluminum alloy, Mil-spec HAIII hard anodized finish• Body color: Black• Water resistance: IPX-8 for use in adverse weather conditions• Included accessories: Lanyard*1, O-ring*1User Manual
-
-
Features
•Mini-might brightness, thumb-sized. •CREE XP-L HI V3 LED, maximum output up to 600 lumens. •Extreme runtime, up to 9 days in moon mode. •Professional optical lens design, even-lit flood and soft beam. •Tail magnetic base function, attach to a metal surface to provide “hands-free” illumination. •Fade-in and Fade-out function when the turbo mode is the initial mode for on and off to promote eye safety and improve user experience. •Newest Intelligent Temperature protection System(ITS) monitors internal temperature and adjusts output to regulate heat dissipation; protects LED and internal components for perfect balance of output and safety. •Intelligent Battery Capacity indicator to view remaining battery capacity at any time. •Unique lock-out mode prevents accidental activation; avoiding battery drains during storage or travelling and prevents unintended directly shining into eyes. •Reverse-polarity protection prevents damage due to incorrect battery orientation. •One-touch low and with mode memory function. •Aerospace Aluminum Alloy construction; CNC precision machining; Mil-Spec HAIII anodizing, anti-abrasive, lighter and robust. •Compatible with CR123A and 16340 Li-ion battery, KLARUS high performance 16340 battery with Micro- USB port included, no need to bring a charger, easy to use, safe and reliable.Specifications
•CREE XP-L HI V3 LED, 50000 hours life. •4 lighting levels, 2 flashing modes. •Working Voltage: 2V-4.2V. •Compatible Batteries: CR123A x 1 or 16340 Li-ion battery x 1. •Reflector: Convex Lens. •Switch Type: Side Switch. •Dimension: (Head)19.8mm(0.78") x (Body)20.5mm(0.81") x (Length)54.5mm(2.15"). •Net Weight: 27g (0.95oz) (w/o battery). •Material: 6061-T6 Aluminum Alloy Body, Mil-Spec HAⅢ Anodizing. •Waterproof: IPX8 (underwater 2 meters). •Included Accessories: Spare O Ring x 1, Stainless Steel Clip x 1, 16340 Li-ion Battery with Micro-USB Charging Port x 1. -
Features
• CREE XP-L HI V3 LED, up to 50,000 hours life • Maximum output 700 Lumens; Maximum runtime 67 hours. • Small and lightweight for everyday carry(40g without battery.) • TC4 Titanium alloy body- permanent colour, corrosion & scratch resistant finish • Battery Capacity Indication displays remaining power for easy monitoring • One Touch Access to Moon-light and High output levels • Unique high efficiency circuitwith broad voltage range to accommodate both AA (Primary/Rechargeable) and Li-ion 14500 batteries • Constant Current Control with no PWM flash; suitable for photography illumination • Over-Discharge Protection automatically lowers output levels to protect rechargeable batteries • Lock-Out mode specially designed to prevent accidental activation of the flashlight • Reverse Polarity Protection for ease of use • Exclusive Stainless Steel switch; Elegant, Ergonomic, Easy to use • AR (Anti-Reflective) coated MineralLens hardened for scratch resistance • IPX-8 water protection (2 meters submersible rating)Specifications
• CREE XP-L HI V3 LED; 50,000 hours life • Voltage Range: 1.0V – 4.2V • Battery：AA x 1; Li-ion 14500×1 • Reflector: Orange Peel • Switch: Side Switch • Material: Titanium alloy • Weight: 40g (1.41oz) (without battery) • Protection: IPX-8 rating (up to 2 meters submersible) • 3 output levels，2 strobe patterns • Lens: Hardened Mineral Glass; AR coated; Scratch resistant -
Features
• Nichia 219C LED, max output up to 230 lumens, max runtime up to 193 hours.• High CRI (color rendering index) LED, CRI≥90, (5000K), simulate natural lighting.• 2 AAA batteries, easy to power.• PMMA optical lens, 92% light transmission.• Professional lens system design, soft even spot without dark area to avoid mistakes in exams.• Zero blue ray damage (RG0) to the eyes, perfectly suited for pupil examination.• Streamlined pen design, lightweight, stylish, easy to carry.• Stainless steel clip on aluminum flashlight tube with excellent grip texture.• Mode Memery, the last mode will be automatically entered into when turning on after 3 seconds of powering off.• Reverse polarity protection to prevent circuit damage from reversed battery insertion.• Aerospace Aluminum alloy body and Mil-spec hard anodizing(HA III); abrasion resistant, lightweight and robust.• Stainless steel bezel design protects the lens and reflector system from drops and impacts.Specifications
• Features Nichia 219C LED, 5000K, 50,000 hours lifetime• 3 light levels• Batteries: 2 AAA alkaline or NI-MH batteries (can’t use 10440 Li-ionbatteries)• Size: 133mm（Length）*14.2mm（bezel）*12.9mm（body diameter）• Net weight: 26g（without batteries）• Working voltage: 1.8-3.3V• Lens: PMMA optical material, with light transmittance up to 92% light transmission• Color: Black• Accessories: O ring
Call Us Today! +264 61 241450
