-
-
-
DUAL FULL HD LCD DASHCAM Full HD 1080p @30fps for both front and rear cameras. The DR490L-2CH records fluid videos of the front and rear of your car at a 130° angle of view. The Sony STARVIS image sensor gives you outstanding video clarity day and night. With Night Vision, video clarity at night is further enhanced during Parking Mode–especially useful in low-lit areas like underground parking lots. The LCD touchscreen and simple user interface make navigating the menus a breeze.
-
FULL HD CLOUD DASHCAM PERFORMANCE AND FUNCTIONALITY Sony STARVIS™ sensor with Full HD 1080p at up to 60 frames per second. Record fluid videos at a wide 139° view angle. STARVIS imaging sensors are the benchmark in video clarity under low light, and the one equipping the DR750S-1CH is no exception. You can rest assured that your dashcam will capture critical details whether you are driving or letting your BlackVue monitor your parked vehicle. With BlackVue Over the Cloud, check on your car from anywhere, anytime.
-
DUAL-FULL HD CLOUD DASHCAM DASHCAM WITHOUT COMPROMISE Dual STARVIS™ sensors in Full HD 1080p (front 60 / rear 30 frames per second). Seeking a dual-camera system that does not compromise on fidelity? Look no further. Record fluid videos of the front and back of your car at a wide 139° view angle. STARVIS imaging sensors are a reference in video clarity under low light, and they equip both the front and rear cameras of the DR750S-2CH. You can rest assured that your dashcam will capture critical details whether you are driving or letting your BlackVue monitor your parked vehicle. With BlackVue Over the Cloud, check on your car from anywhere, anytime.
-
Redefining the Dashcam The DR900S Series redefines expectations for dashcam video fidelity and storage efficiency. With its 8-megapixel CMOS sensor in the main camera, the DR900S-2CH captures 4K Ultra High Definition video—four times as many pixels as Full HD. The rear Full HD Sony STARVIS™ image sensor ensures best image quality under any light. Thanks to the H.265 (HEVC) compression, your videos look better and file size is kept as small as ever.
-
Cub 4s
- 4,000 lb (1,814 kg) line pull
- Power in and power out
- Winch drum centred avoids the interference of rope and provides streamlined appearance
- Mechanical load holding and dynamic brake for 100% braking
- High efficiency, low amp draw and sealed permanent magnet motor
- Full metal 3 stage planetary gear train for greater pulling force
- Sliding pin and ring gear clutch for rapid synthetic rope payout
- Weather sealed contactor gives better water proof and lower amp. draw
- E/e marked as of EU Directive 97/24/EC. EEC Type - Approval Number: e4*97/24*97/24/8/IX*0036*01
-
DV-6s
- Heavy duty series wound motor delivers superior torque output and faster line speed.
- Lightweight and compact design is easy for front of vehicle.
- Submersible sealed contactor handles high amps and allows higher duty cycle.
- 12 strand construction synthetic rope, coated to improve abrasion resistance and to protect from the ingress of dirt and grit.
- The U.S Germany, U.K. France, etc patented automatic, full load cone brake structure outside the drum holds the full load without slippage.
- Meet international standards of CE Machinery Directive 2006/42/EC and CE Electromagnetic Compatibility Directive 2004/108/EC.
- 2” rear receiver and quick connector wiring kits for rear of vehicle as option.
-
- All sealed high performance motor supplies superior torque output and faster line speed.
- 3 stage planetary gearbox delivers the most reliable and durable performance of winch under the rugged conditions.
- The U.S., Germany, U.K., France, etc patented automatic CBS (Cone Brake Structure) holds firmly in full load and provides easy maintenance. Specific design of brake (CBS) outside the drum is ideally suited to heat-sensitive synthetic rope.
- Heavy duty sealed contactor ensures sound waterproof protection.
- Turn clutch by ergonomic T-handle for rapid rope payout. The equally positioned pin holes make it easily rotate by 40° increments for special in-bumper application.
- Protective thermal sensor LED.
-
Features
• Cree's newest XHP35 HI D4 LED, max output 2000 lumens, max runtime 210 hours• Max beam distance 1000M, best suited for outdoor adventures; search and rescue operation• Dual Switch design for convenient and easy operation- Independent tail and side switch, each with full set offeatures and easily adapted to any scenarios• Unique lockout mode prevents accidental operations; avoiding battery drains during storage or travel and prevents unintended direct shining into eyes• Battery capacity indicator display enables controlled usage based on remaining battery charge• ITS (Intelligent Temperature System) temperature control monitors internal temperature and adjusts outputs for balanced brightness; protects the LED and internal components; ensuring safety, stability and optimal performance• Dual Switch for one-touch turbo and one-touch low, plus mode memory• Reverse-polarity protection prevents damage due to incorrect battery orientation• Integral body design eliminates battery holder for superior comfort• Aircraft-grade aluminum alloy (Mil-Spec HAIII), lightweight and abrasion resistant• Tempered glass lens with AR coating; scratch resistant• Updated reflector design, coated to provide the perfect beam spot for exceptional distance illuminationG35: With its Extreme output, Easy interface, Far-reaching beam, and Long run time all packed into a compact body, far outperforms the competitors -
3.5 Amp UltraSafe Battery Charger and Maintainer
The G3500 is a portable and automatic battery charger. It can be used for both 6V and 12V lead-acid and 12V lithium-ion batteries. The G3500 is designed for charging cars, boats, RVs, SUVs, diesel trucks, motorcycles, ATVs, snowmobiles, personal watercraft, lawn mowers, and much more. It can be used as a battery maintainer to keep both starter and deep-cycle batteries fully charged. It also monitors battery activity for safe and efficient charging without any overcharge. The G3500 is complete with a built-in battery desulfator in order to rejuvenate underperforming batteries.- A 6V and 12V battery charger and maintainer.
- Charges lead-acid and lithium-ion batteries up to 120 amp-hours.
- Recovers deeply discharged batteries down to 2-volts.
- Spark-proof technology and reverse polarity protection.
- Built-in battery desulfator to recover worn-out batteries.
- Safely monitors battery actively with zero overcharge.
- Suitable for start-stop and CANbus vehicle systems.
- Advanced diagnostics indication for damaged batteries.
- Progressive repair mode for heavily sulfated 12V batteries.
-
7.2 Amp UltraSafe Battery Charger and Maintainer
The G7200 is a portable and automatic battery charger. It can be used for both 12V and 24V lead-acid and lithium-ion batteries. The G7200 is designed for charging cars, boats, RVs, SUVs, diesel trucks, motorcycles, ATVs, snowmobiles, personal watercraft, lawn mowers, and much more. It also can be used as a battery maintainer to keep both starter and deep-cycle batteries fully charged. It also monitors battery activity for safe and efficient charging without any overcharge. The G7200 is complete with a built-in battery desulfator in order to rejuvenate under-performing batteries.- A 12V and 24V battery charger and maintainer.
- Charges lead-acid and lithium-ion batteries up to 230 amp-hours.
- Recovers deeply discharged batteries down to 2-volts.
- Spark-proof technology and reverse polarity protection.
- Built-in battery desulfator to recover worn-out batteries.
- Safely monitors battery actively with zero overcharge.
- Suitable for start-stop and CANbus vehicle systems.
- Advanced diagnostics indication for damaged batteries.
- Progressive repair mode for heavily sulfated 12V batteries.
- Constant power supply for changing a car battery or powering 12V devices.
-
4000 Amp UltraSafe Lithium Jump Starter
The GB150 is a portable lithium-ion battery jump starter pack that delivers 4,000-amps (22,500 J3S) for jump starting a dead battery in seconds. It features a patented safety technology that provides spark-proof connections and reverse polarity protection making safe and easy for anyone to use. It's a powerful battery booster that doubles as a portable power source for recharging USB devices, like a smartphone, tablet and more, or powering 12-volt devices, like a tire inflator, power inverter and much more. Designed for a car, boat, RV, truck and more with both gas and diesel engines up to 10 liters and more.- A lithium battery jump starter rated at 4,000 Amps (22,500 Joules3S).
- Spark-proof connections and reverse polarity protection.
- Recharges USB devices, like smartphones, tablets, and more.
- Power 12V devices anywhere, like tire inflators, power inverters, and more.
- 500 lumen LED flashlight with multiple modes, including SOS.
- Jump starts both gas and diesel engines up to 10 liters and more.
- Provides up to 80 jump starts on a single charge.
-
2000 Amp UltraSafe Lithium Jump Starter
The GB70 is a portable lithium-ion battery jump starter pack that delivers 2,000-amps (15,700 J3S) for jump starting a dead battery in seconds. It features a patented safety technology that provides spark-proof connections and reverse polarity protection making safe and easy for anyone to use. It's a powerful battery booster that doubles as a portable power source for recharging USB devices, like a smartphone, tablet and more, or powering 12-volt devices, like a tire inflator, power inverter and much more. Designed for a car, boat, RV, truck and more with gas engines up to 8 liters, and diesel engines up to 6 liters.- A lithium battery jump starter rated at 2,000 Amps (15,700 Joules3S).
- Spark-proof connections and reverse polarity protection.
- Recharges USB devices, like smartphones, tablets, and more.
- Power 12V devices anywhere, like tire inflators, power inverters, and more.
- 400 lumen LED flashlight with multiple modes, including SOS.
- Jump starts gas engines up to 8 liters, and diesel engines up to 6 liters.
- Provides up to 40 jump starts on a single charge.
-
Rotating 360 degree design for you to adjust the light angle freely
-
• Tactical crenulated strike bezel attachement option for self-defence • Highly secure fit and detachable • CNC machined from 304 stainless steel billet and finished for smooth handling • Dimension: Height 20.80mm, Diameter 35.00mm • Net weight: 25g • For use with: RS11, XT11, XT12, XT11S, XT11GT, XT12S
-
-
Klarus Filters 64mm for XT32
- Elastic silicone body, Fits multiple light bezels, Rugged lens protection.
- Red Filter- Emergency, Traffic control or Hunting. Penetrates smoke and fog, keeps hunters hidden. Retains night vision.
- Green Filter-Hunting and Hiking. Map reading or covert operations. Retains night vision.
- Blue Filter- Fishing. Blood trail tracking. Reading up close.
- 63.6mm bezel compatible (i.e. XT32)
-
-
-
-
Features
• Microcomputer control system allows each of the four battery slots to charge individually • Capable of charging 4 batteries simultaneously (Ni-MH/Ni-Cd/ LiFePO4/ 3.7V Li-ion) Li-ion：26650 22650 18650 18490 17670 17500 16340 14500 10440 LiFePO4：16340(RCR123A) Ni-MH/Ni-Cd：AA AAA AAAA C • The 12 LEDs (4 groups) will clearly display the charging progress of the battery Charging voltage is from AC100V to 240V or DC12V, safe to use on all power grids in cities worldwide • -dV/dt Control technology to charge Ni-MH and Ni-Cd batteries more fully • Built-in reverse polarity and short-circuit protection • Features over-charge protection to prevent battery damage. Automatically stops charging when complete • Auto-activation function： a). Automatically reactivates “zero voltage” short-circuit protected Li-ion batteries that have been completely drained of power b). Three corresponding indicator lights flash simultaneously when attempting to charge a battery that cannot be reactivated • Made from durable ABS (fire retardant/flame resistant) for your safety • Designed for optimal heat dissipation, long lifespan.Specifications:-
Input Voltage: AC 100-240V 50/60Hz DC 12V • Output Voltage, Current: 4.2V±1%V, 375mA×4 750mA×2 3.6V±1%V, 375mA×4 750mA×2 1.48V±1%V, 375mA×4 750mA×2 Please note : Slots 1 and 3 constitute one group; Slots 2 and 4 constitute the other group When using one battery in a single group, the battery charging current is 750mA • Compatible with： Li-ion, Ni-MH, LiFePO4, Ni-Cd Li-ion：26650 22650 18650 18490 17670 17500 16340 14500 10440 LiFePO4：16340(RCR123A) Ni-MH, Ni-Cd：AA AAA AAAA C • Size：138mm×96mm×36mm • Weight: charger weight 165g，charge cable weight 40g • Optimal working environment：5%(0°C)-90%(35°C) (fully-laden regular activity) • Storage temperature: 0°C-40°C -
Features
• Microcomputer control system allows each of the four battery slots to charge and display the voltage and charging capacity of each battery independently • Capable of charging 4 batteries simultaneously (Ni-MH/Ni-Cd/LiFePO4/3.7V Li-ion/3.8V Li-ion) Li-ion：26650 22650 18650 18490 17670 17500 16340 14500 10440 16340 (RCR123A) Ni-MH/Ni-Cd：AA AAA AAAA C • Charging voltage is from 100-240V, suitable for use in ANY country worldwide • LCD panel clearly displays battery's charging progress, type, voltage and capacity • Can be used to charge batteries either as a Car charger with DC (5V 2A) or as a home charger using AC • DV Control technology improves the charging efficiency and shortens the charging time • Built-in reverse polarity and short-circuit protection • Features over-charge protection to prevent battery damage. Automatically stops charging when complete • Auto-activation function: a). Automatically reactivates “zero voltage” short-circuit protected Li-ion batteries that have been completely drained of power b). LCD displays “null” when attempting to charge a battery that cannot be reactivated • Made from durable ABS (fire retardant/flame resistant) for your safety • Designed for optimal heat dissipation, long lifespanSpecification
• Input Voltage: AC 100-240V 50/60Hz • DC 5V 2A • Output Voltage: 4.35V ±0.02V/4.2V±0.2V/ 3.6V ±0.02V / 1.43V ±0.02V Input Current: 1000mAh x 2/500mAh x 2 (Slots 1 and 4 current: 1000mAh z for large capacity batteries; Slots 2 and 3 current 500mAh for small capacity batteries) • Size：145mm×100mm×3mm • Compatible with: LiFePO4, 3.7v & 3.8v Li-ion, Ni-MH, Ni-Cd • Li-io：26650 22650 18650 18490 17670 17500 16340 14500 10440 \16340( RCR123 ) Ni-MH, Ni-Cd：AA AAA AAAA C • Weight: 260g • Optimal working environment: humidity 5-90% and temperature 0-35°C ( fully-laden regular activity) • Storage temperature: 0°C-40°C -
Features
• Microcomputer control technology for intelligent charging • Capable of charging almost all types of rechargeable batteries (Ni-MH/Ni-Cd/ LiFePO4/3.7V Li-ion/3.85V Li-ion) Li-ion：26650 22650 18650 18490 18350 17670 17500 16340 14500 10440 16340(RCR123A) Ni-MH/Ni-Cd：AA AAA AAAA C • LED display to clearly show charging progress • Optional 0.5A or 1A output charging current • Charger cable DC 5V micro USB port connects directly to either a car charger plug, a computer USB port or other USB charger plug for charging at home or while travelling • -DV/dt Control technology to charge Ni-MH and Ni-Cd batteries more fully • Built-in reverse polarity and short-circuit protection • Features over-charge protection to prevent battery damage. Automatically stops charging when complete • Auto-activation function： a). Automatically reactivates “zero voltage” short-circuit protected Li-ion batteries that have been completely drained of power b).Will not charge a battery that cannot be reactivated. • Made of durable ABS (fire retardant/flame resistant) for your safety • Optimal heat dissipation design for long lifespanSpecification
• Input Power: Micro USB DC 5V/1A • Output Voltage : 4.35V/4.2V/3.65V/1.48V ±1% • Output Current : 0.5A/1A • Size : 115mm×37mm×32mm (Length/Width/ Height) • Compatible with：LiFePO4, 3.7V/3.85V Li-ion, Ni-MH, Ni-Cd Li-ion：26650 22650 18650 18490 18350 17670 17500 16340 14500 10440 16340(RCR123A) Ni-MH, Ni-Cd：AA AAA AAAA C • Weight: 45g+17g(micro USB cable) • Optimal working environment：5%(0℃)-90%(35℃) (fully-laden regular activity) • Storage temperature: 0℃-40℃
Call Us Today! +264 61 241450
